[an error occurred while processing this directive] EPON book - Errata

Ethernet Passive Optical Networks

ISBN: 0071445625

Errata

Page xiv, line 11 "... expla- ining EPONs" "... explaining EPONs" typesetting error
Page 30, line 5 "... 1.5 Gbps, and 2.5 Gbps" "... 1.244 Gbps, and 2.488 Gbps" error in manuscript
Page 76, Figure 6.8 #define CRC8_POLYNOMIAL = 0x07; #define CRC8_POLYNOMIAL 0xE0 error in manuscript
Page 144, Figure 9.3 "OFA" (first character is letter "O") "0FA" (first character is digit "zero") error in manuscript
Page 144, Figure 9.3 Incorrect arrow labels. Arrow pointing from received value 3A8 to symbol /R/ (3A8) should be labeled "No bit errors".

Arrow pointing from received value 0E9 to symbol /T/ (2E8) should be labeled "2 bit errors".

Here is the corrected Figure 9.3.
typesetting error
Page 229, Figure 16.7 Some arithmetic operators are missing. Here is the corrected Figure 16.7. typesetting error


Revision

Issue Resolution
Frame format in Figure 6.5 on page 74 incorrectly shows preamble following SPD (start-of-packet delimiter) and being of length 8 octets. The SPD is added by Physical Coding Sublayer (PCS) and occupies the first or the second byte of preamble (as shown in Figure 6.6). Modify the figure 6.5 as shown here. This figure now represents a frame as transmitted at GMII but before the PCS.
State machine in Figure 7.3 on page 80 has a transition labeled UCT. The abbreviation UCT (unconditional transition) is not explained until page 97. Move the definition for UCT from footnote on page 97 to section 7.2.6 TRANSMIT_CODE_GROUP state on page 83.
  [an error occurred while processing this directive]